NEW POWER CUTTER SALES

HUSQVARNA K770 POWER CUTTER - 14"

The Husqvarna K 770 is a powerful all-round power cutter with features that make it one of the best power cutters on the market. Equipped with semi-automatic SmartTension™ system allows for optimal power transmission, minimum wear and maximum belt life. The light weight, outstanding power-to-weight ratio, the reliable start and exceptionally low vibrations mean less strain and maximized productivity. Suitable for road work and easy to cut in a straight or curved track or close to sidewalk when used with KV7 trolley.

↓ SCROLL DOWN TO SEE MORE INFO  ↓ 

HUSQVARNA K 970 POWER CUTTER - 16"

Sturdy, reliable, light and powerful - the K 970 power cutter is ready to perform when you are. The ultimate choice when you need an all-round cutter performing in the toughest conditions, withstanding climate and fuel variations. Suitable for road works when used with the corresponding KV 970 trolley. The trolley also means you can fully concentrate on the cutting job.

ICS CONCRETE CHAINSAW 680ES

Built to meet the operation and flexibility demands of the general construction user, the 680ES stands alone in terms of reliability and value. Easy to start with a new multifunction lever to control choke, run, and stop functions. The distinctive black powerhead houses specially designed carburetors and ignition systems that work together to ensure easy starting, cooler operation and dependable performance at just about any elevation. Available with 12-inch guide-bars and the entire line of FORCE3 series diamond chain.

↓ SCROLL DOWN TO SEE MORE INFO  ↓ 

ICS CONCRETE CHAINSAW 695XL

695XL-16 PG Gas Saw Package with 16 inch/40 cm FORCE4 guide-bar & PowerGrit chain. Also compatible with the full line of FORCE4 concrete diamond chains. The 695XL features an easy-to-start engine with a higher energy ignition system and durable, long-lasting components including a new muffler, carburetor, and piston and cylinder. Based on the best-selling 695 saw platform, the 695XL is the highest horsepower Oregon gas power cutter for frequent-use by general construction, utility contractors, and concrete professionals.

• Use on concrete, stone, masonry, brick, block, ductile iron, cast iron, PVC, HDPE and more
• Most versatile gas power cutter
• Piston and cylinder lowers engine temperature
• Longer life muffler with reinforced internal baffle
• Easy-to-start with higher energy ignition system
• Easy-to-tune carburetor
• Will also operate FORCE4 diamond chains
  

↓ SCROLL DOWN TO SEE MORE INFO  ↓ 

DIAMOND MINI-DRAGON RING SAW

The Mini-Dragon saw from Diamond Products has been a great power transfer to blade, right where it is needed. Cutting speed can be 3x faster and a 1/3 less cutting cost compared to conventional chainsawing.

• Best power transfer to blade-where it is needed
• 1/3 less cutting cost than chain sawing
• Eliminates over cuts on corners
• Electronic overload with warning light
• Splash guard
• Spring loaded blade guard
• Up to three times faster than chain sawing
• Diamond blade life up to five times longer-saves you money
• Light weight and easy to handle-22 lbs.
  

↓ SCROLL DOWN TO SEE MORE INFO  ↓ 

MAKITA EK8100 POWER CUTTER - 16"

2-stroke power cutter solution for every application. The Makita 16" Power Cutter (model EK8100) is a gas power cutter engineered to meet the demand for convenience and performance. The EK8100 delivers with faster starting, more power, and improved fuel economy. The EK8100 has an 81 cc engine with 5.6 HP (maximum horsepower) to take on the most demanding applications. The ignition coil with start-support function stores electrical power with each pull for easier start-ups. It’s engineered for reduced flooding with a carburetor that includes improved deco-valve and metering spring for precise fuel regulation at start up. The EK8100 also features more efficient fuel consumption with an SLR muffler that recycles unburned fuel vapor for reduced scavenging-losses and 15% improved consumption. The EK8100 also features a five-stage foam-paper-nylon air filter system with advance directional air flow that provides cleaner air for better saw performance and easy filter cleaning and replacement. The EK8100 is engineered for professional concrete cutting applications and is ideal for landscapers, road construction crews, railroad crews, rescue crews, general steel contractors, masons, and welders.

• Improved decompression valve and metering spring for precise fuel regulation
• Start capacitor with start support function stores electrical energy resulting in significantly less pull start force
• On-Off-Choke operation switch on a single lever for operator convenience
• Five-stage, foam-paper-nylon system with advance direction air flow provides cleaner air for better saw performance
• SLR Muffler recycles un-burned fuel vapor for reduced scavenging-losses and up to 15% improved fuel consumption
• Microchip controlled carburetor designed to compensate engine timing according to work load
• Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, wall or directly above the ground
• 16" wheel capacity increases maximum cutting depth to 5-3/4"
• Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
• Aluminum guard and wheel pressure plates to reduce weight
• 2-mass dampening system provide reduced vibration to operator
• Water supply kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
  

↓ SCROLL DOWN TO SEE MORE INFO  ↓ 

MAKITA EK7301 POWER CUTTER - 14"

The Makita 14" Power Cutter (model EK7301) is a gas power cutter engineered to meet the demand for convenience and performance. The EK7301 delivers with faster starting, more power, and improved fuel economy. The EK7301 has a 4.5 cu.in. (73 cc) engine with 5.1 HP (maximum horsepower) and a no load speed of 9,350 RPM to take on the most demanding applications. The ignition coil with start-support function stores electrical power with each pull for easier start-ups. It’s engineered for reduced flooding with a carburetor that includes improved deco-valve and metering spring for precise fuel regulation at start up. The EK7301 also features more efficient fuel consumption with an SLR muffler that recycles unburned fuel vapor for reduced scavenging-losses and 15% improved consumption. The EK7301 also features a five-stage foam-paper-nylon air filter system with advance directional air flow that provides cleaner air for better saw performance and easy filter cleaning and replacement. The EK7301 is engineered for professional concrete cutting applications and is ideal for landscapers, road construction crews, railroad crews, rescue crews, general steel contractors, masons, and welders.

• Improved decompression valve and metering spring for precise fuel regulation at start up
• Start capacitor with start support function resulting in significantly less pull start force
• On-Off-Choke operation switch on a single lever for operator convenience
• Five stage filtration system with advanced directional air flow, provides cleaner air for better saw performance
• Starter grip decompression valve for faster starting
• Improved ignition system with large flywheel and rare earth magnets create more efficient power.
• Reinforced aluminum blade guard with 70 degrees range of limitless positioning using a marked knob handle
• Cutting arm position simply changes from center position to flush (outboard) position allowing cuts directly adjacent to curb edges, wall or directly above the ground
• Cushioned operator grips with 4 vibration-absorption rubber buffers for increased operator comfort
• Microchip controlled carburetor designed to compensate engine timing according to work load
• Aluminum guard and wheel pressure plates to reduce weight
• Water supply kit is assembled to saw and can be used with garden hose, gravity tank or pressure tank
• 2-mass dampening system engineered to provide reduced vibration to operator
• SLR Muffler recycles un-burned fuel vapor for reduced scavenging-losses and up to 15% improved fuel consumption
  

↓ SCROLL DOWN TO SEE MORE INFO  ↓ 

MAKITA EK6106 POWER CUTTER - 14"

The 14” Power Cutter, model EK6101, is engineered for industrial performance but with less weight at only 19.6 lbs. The compact and efficient EK6101 is powered by a 61cc engine with a full 4.4 HP for the most demanding concrete cutting applications. It’s engineered to start easier and vibrate less. It also has innovative features like Stratified Air Scavenging (SAS) that recovers up to 75% of unburned fuel to reduce fuel consumption, and a cyclonic air intake that discards larger debris for increased air filter life – and less maintenance. The compact and efficient EK6101 is an ideal cutting solution for metal decking, angle iron, i-beams, cast iron pipe, brick/masonry, stone/concrete blocks, railroad rails, road curbs, and asphalt. Blade sold separately.

• Compact performance at Only 19.6 lbs with 4.4 HP/61 cc Engine
• Cyclonic air Intake delivers more air, more efficiently and increases air filter life by discarding 90% of larger debris
• Start capacitor with start support function resulting in significantly less pull start force
• Smaller hub and drive wheel assembly increases maximum cutting depth to 5-1/8"
• Stratified Air Scavenging (SAS) sends air flow through the transfer port to push the burned gases through the exhaust outlet recovering 75% of unburned fuel and reducing fuel consumption by 20%
• Larger surface inverted intake and filter system extends filter life and service intervals
• Sliding front engine mounts help absorb vibration by detaching when cutting pressure is applied
• Multi-ribbed, self tensioning belt is engineered to provide a more consistent transfer of power
• Lower noise at 97 dB(A) and smoother idle for continuous operation
• Clear primer bulb facilitates fuel delivery to the carburetor for easier cold starts
• On-Off choke operation switch on a single lever with touch-stop function for operator convenience
• Aluminum guard and wheel pressure plates to reduce overall weight
• Clear fuel tank window provides a convenient fuel level indicator
• Water supply kit with pressure control knob for more accurate flow rate adjustments
• Vertical filler neck position for conventional refueling operation
• Integrated wrench holder
  

↓ SCROLL DOWN TO SEE MORE INFO  ↓ 

MAKITA 5477NB HYPOID SAW - 7-1/4"

Makita’s 7-1/4-Inch Hypoid Saw (model 5477NB), combines a powerful 15 AMP motor and Makita’s efficient hypoid gears with ease-of-use features for more power, better performance and superior cuts. The 5477NB is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber, including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, carpenters, and general contractors seeking a best-in-class 7-1/4-Inch hypoid saw. The 5477NB has a powerful 15 AMP motor with ball bearing construction for increased productivity. Makita’s efficient hypoid gears have greater surface contact and deliver more constant power. The oil bath technology and sealed gear housing are engineered for less maintenance, with high quality heat treated hypoid gears for long lasting performance. The 5477NB includes a Makita 7-1/4-Inch General Contractor Framing Blade with Advanced Tooth Design. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is designed with special Makita heat vents strategically set to dissipate heat and increase performance.

• Hypoid gears deliver more power and have greater surface contact than conventional worm drive gears
• Powerful 15 AMP motor for increased productivity
• Oil bath technology and sealed gear housing for less maintenance
• 0°-51.5° bevel capacity with positive stops at 45° and 51.5° is ideal for truss and rafter cut-outs
• High quality, heat treated hypoid gears are engineered for long lasting performance
• Large cutting capacity (2-3/8" at 90°; 1-3/4" at 45° and 1-9/16" at 50°)
• Lower guard design improves performance when making bevel and narrow cuts
• Oversized top handle for better fit and added comfort
• Large levers for fast bevel and depth adjustments
• Push button spindle lock for easy blade changes
• Blade wrench is attached to the saw for fast and convenient blade changing
• Ergonomically designed rubberized grip for improved control
• Base plate is chemically treated to resist rust and warping for superior cuts
• Reinforced 10 ft. cord withstands job site abuse
• Large and easy to read markings on depth and bevel scales
• Externally accessible brushes for easy replacement and extended tool life
• 24T thin kerf carbide tipped blade for fast cutting
• Ideal for framers, builders, masons and contractors
  

↓ SCROLL DOWN TO SEE MORE INFO  ↓ 

NORTON CLIPPER CP514-350 CUT OFF SAW - 14"

Designed with the end-user in mind to cut a smooth and fast. This cut off saw is fully equipped to handle the everyday needs of any job site with unrelenting durability and reliability. Better balance, better performance, better saw!

• An electronic sensor will indicate a low oil level and adjust the engine to idle to prevent engine damage
• Proprietary electromagnetic valve eliminates the standard choke and half throttle start
• The 3-step EASY start eliminates the hassle of a choke
• Simply turn the switch on, prime the engine, and push the decompression button, then pull the cord to start
• Patented twin-air inlets create an air pulsation keep the saw running cool and reduce debris being trapped in the filter
• 3-stage filter
• External rocker wheel vibrates the filter to further help release debris
• Easy Start System. NO chokes to set, four simple steps to start
• Higher performance air filtration system with filter shaker for longer life
• Better balance: the blade will not hit the ground when you pick the saw up
• Diamond Blades Sold Separately
  

↓ SCROLL DOWN TO SEE MORE INFO  ↓