COMMERCIAL PUMP RENTALS
WHEN YOU'RE LOOKING FOR COMMERCIAL PUMP RENTALS NEAR ME, TRUST EASY RENT ALL TO HELP GET THE JOB DONE RIGHT.
COMMERCIAL PUMP RENTALS NEAR ME
COMMERCIAL PUMP RENTAL NEAR ME:
MULTIQUIP MQ62TKT
Industrial 6" wet priming de-watering trash pump provides the proven performance you have come to expect from Multiquip. The pump is powered by trusted and efficient KOHLER KDW 1404 Tier 4 Final diesel engine. The MQ62TKT provides a DOT/NHTSA qualified trailer with 28 GAL fuel tank.
List of Services
-
List Item 1List Item 1
Abrasion-resistant, oil lubricated tungsten/carbide seal system
-
List Item 2List Item 2
Pumps solids up to 3 inches in diameter
-
List Item 3List Item 3
Approximate running time of 15 hours
-
List Item 4List Item 4
Pumps up to 1,190 gallons per minute
-
New List Item
Maximum head rated 111 feet
-
New List Item
Powered by KOHLER Tier 4 Final 4-cylinder, diesel engine
-
New List Item
Engine incorporates a water/fuel separation filtration system
-
New List Item
Full featured, shock mounted LOFA EL240 Control Panel
-
New List Item
Industrial DOT/NHTSA approved single-axle trailer
-
New List Item
28-gallon fuel cell
-
New List Item
Pump-end supplies large cleanout cover
-
New List Item
6” Male NPT Threaded Suction/Discharge ports
-
New List Item
Wear-resistant ductile cast iron volute and impeller assembly
-
New List Item
Stainless steel wear plate
-
New List Item
Integrated lifting bale
| MULTIQUIP MQ62TKT | |
|---|---|
| Suction x Discharge | 6 x 6 in |
| Max. Water Capacity | 1190 gpm |
| Max. Lift | 25 ft |
| Max. Head | 111 ft |
| Max. Pressure | 48.9 psi |
| Max. Solid Intake | 3 in |
| Fuel Tank Capacity | 28 Gal |
COMMERCIAL PUMP RENTAL NEAR ME:
WACKER PT6LS
Heavy-duty 6" Skid Mounted Centrifugal Trash Pumps for Quick Dewatering. The Wacker Neuson 6" PT6LS skid self priming centrifugal trash pumps are reliable dewatering worksite tools that can move larger amounts of water. The 6" PT6LS can move up to 1300 gpm (4935 L/min) and soilids up to 2" (50mm).
List of Services
-
List Item 1List Item 1
Mixed flow impeller design to produce high volume and head for increased pump capacity
-
List Item 2List Item 2
Oil-lubricated silicone carbide seal to reduce maintenance and provide seal protection
-
List Item 3List Item 3
Discharge elbow rotates 360 degrees to accommodate various discharging angles
-
List Item 4List Item 4
Automatic engine shutdown to protect engine from damage due to low oil pressure or high cylinder temperature
-
New List Item
Liquid-cooled Tier 4 diesel engine for enhanced reliability and provides cleaner emissions
| WACKER PT6LS | |
|---|---|
| L x W x H in | 79 x 35 x 48 |
| L x W x H Shipping in | 79 x 35 x 52 |
| Diameter Suction and Discharge in | 6 |
| Operating weight lb | 1,587 |
| Shipping weight lb | 1,605 |
| Operating data | |
| Discharge Head ft | 100 |
| Discharge capacity US gpm | 1,300 |
| Pressure psi | 43 |
| Suction height Lift ft | 25 |
| Solids diameter Max. Size in | 2 |
| Engine / Motor | |
| Engine / Motor type | Diesel, Liquid Cooled |
| Engine / Motor manufacturer | Kohler |
| Displacement in³ | 83.7 |
| RPM / speed Max. Engine rpm | 2,700 |
| RPM / speed Operating rpm | 900 |
| Power Max. Rated hp | 24 |
| Power Rating Specification | ISO 3,046 IFN |
| Engine oil Capacity US qt | 5.3 |
| Fuel type | Diesel #2 - ULSD |
| Tank capacity Fuel US gal | 28 |
| Fuel consumption @2700rpm US gal/h | 1.5 |
| Runtime @2700rpm hours | 17.3 |
COMMERCIAL PUMP RENTAL NEAR ME:
MULTIQUIP QP3TH
3" Suction, Trash Pump, 396 GPM, 95 ft. MAX Head; Honda GX-240. This is Multiquip's most popular pump model. The QP3TH is perfect for many pumping applications from dewatering to water tank and water truck use. Dual discharge ports increase the productivity and practicality of this gasoline-powered trash pump.
List of Services
-
List Item 1List Item 1
Features to tackle the demanding requirements of the Pro Contractors
-
List Item 2List Item 2
Trusted 7.9HP Honda GX240 gasoline engine
-
List Item 3List Item 3
Automatic low oil shutdown for the engine is a standard feature
-
List Item 4List Item 4
Pumps water with solid content as large as 1.5-inch (37 mm) in diameter
-
New List Item
Maximum lift of 25 feet (7.6 meters)
-
New List Item
Can pump up to 396 gallons (1,500 liters) per minute
-
New List Item
Dual 3-inch discharge ports to adapt to different applications
-
New List Item
Large cleanout cover removes in seconds without tools
-
New List Item
Carbon/silicon mechanical seal for durability
-
New List Item
Tubular Steel frame for transportation and pump protection
-
New List Item
Cast Iron impeller and volute for abrasion resistance/long life
-
New List Item
Aluminum body with cast-iron fittings
| MULTIQUIP QP3TH | |
|---|---|
| Suction x Discharge | 3 x 3 in |
| Max. Water Capacity | 396 gpm |
| Max. Lift | 25 ft |
| Max. Head | 95 ft |
| Max. Pressure | 41.1 psi |
| Max. Solid Intake | 1.5 in |
| Fuel Tank Capacity | 1.58 Gal |
| Optional Wheel Kit | UWKB |
| Dimensions & Weights | |
| Overall Length | 28.7 in |
| Overall Width | 21.7 in |
| Overall Height | 23 in |
| Operating Weight | 142 lb |
COMMERCIAL PUMP RENTAL NEAR ME:
MULTIQUIP MQD2HA
2" Diaphragm Pump, 50 GPM, MAX Head 25 ft., Honda GX120 Engine. MQ diaphragm pumps utilize a positive displacement design to effectively move high viscosity liquids, sludge, and general heavy debris laden fluids. Their simple reciprocating dynamics provide the force to successfully operate in the most demanding applications.
List of Services
-
List Item 1List Item 1
Ideal for muddy water, high solid content
-
List Item 2List Item 2
Handles 1 5/8” solids
-
List Item 3List Item 3
For fluids up to 180° F
-
List Item 4List Item 4
Pumps up to 50 gallons (189 liters) per minute
-
New List Item
Maximum lift of 25 feet (7.6 meters)
-
New List Item
Powered by a Honda GX120 3.5HP gasoline engine
-
New List Item
Enclosed gears with oil bath lubrication
-
New List Item
Integrated Wheel Kit assembly for ease of transportation
| MULTIQUIP MQD2HA | |
|---|---|
| Suction x Discharge | 2 x 2 in |
| Max. Water Capacity | 50 gpm |
| Max. Lift | 25 ft |
| Max. Head | 25 ft |
| Fuel Tank Capacity | 2.1 qt |
| Optional Wheel Kit | Wheel Kit included with Pump |
| Dimensions & Weights | |
| Overall Length | 27.0 in |
| Overall Width | 18.5 in |
| Overall Height | 20.5 in |
| Operating Weight | 125 lb |
COMMERCIAL PUMP RENTAL NEAR ME:
MULTIQUIP MQD3HA
3" Diaphragm Pump, 90 GPM, 25 ft MAX Head; Honda GX120. MQ diaphragm pumps utilize a positive displacement design to effectively move high viscosity liquids, sludge, and general heavy debris laden fluids. Their simple reciprocating dynamics provide the force to successfully operate in the most demanding applications.
List of Services
-
List Item 1List Item 1
Ideal for muddy water, high solid content
-
List Item 2List Item 2
Handles 1 5/8” solids
-
List Item 3List Item 3
For fluids up to 180° F
-
List Item 4List Item 4
Pumps up to 90 gallons (189 liters) per minute
-
New List Item
Maximum lift of 25 feet (7.6 meters)
-
New List Item
Powered by a Honda GX120 3.5HP gasoline engine
-
New List Item
Enclosed gears with oil bath lubrication
-
New List Item
Integrated Wheel Kit assembly for ease of transportation
| MULTIQUIP MQD3HA | |
|---|---|
| Suction x Discharge | 3 x 3 in |
| Max. Water Capacity | 90 gpm |
| Max. Lift | 25 ft |
| Max. Head | 25 ft |
| Fuel Tank Capacity | 2.1 qt |
| Optional Wheel Kit | Wheel Kit included with pump |
| Dimensions & Weights | |
| Overall Length | 29.0 in |
| Overall Width | 22.0 in |
| Overall Height | 23.0 in |
| Operating Weight | 175 lb |
COMMERCIAL PUMP RENTAL NEAR ME:
MULTIQUIP SS233
2 Inch Discharge, .5 HP, 115V, 55 GPM, 32 ft. Total Head. The highly portable, lightweight SS233 submersible pump is a great choice for flooded rooms, flat roofs, fill tanks, basins, fountains and landscape waterfalls. Features include hardy thermoplastic casing, stainless steel fittings, internal overload protection, fully oil lubricated shaft seals, and UL/CUL certifications.
List of Services
-
List Item 1List Item 1
Powerful .5HP 115V 1Ø thermal overload protected electric motor
-
List Item 2List Item 2
Running AMPS: 6A
-
List Item 3List Item 3
Rated for 5,500 hours of intermittent duty
-
List Item 4List Item 4
Heavy polymer pump casing provides a lightweight, impact resistant unit
-
New List Item
2” NPT discharge port
-
New List Item
MAX FLOW: 55 GPM
-
New List Item
MAX HEAD: 32 ft
-
New List Item
Pumps fluids up to 120º F
-
New List Item
Dewaters surfaces down to ½ inch
| MULTIQUIP SS233 | |
|---|---|
| Impeller Type | Industrial Polymer |
| Impeller Disc Size | 4.5 in |
| Total Head | 32 ft |
| Water Capacity | 55 gpm |
| Max. Solid Intake | .4 in |
| Electrical Specifications | |
| Power | 0.5 HP |
| Phase | Single |
| Voltage | 115 V |
| Starting Amperage | 11.5 A |
| Running Amperage | 6 A |
| Cable Length | 9 ft |
| Dimensions & Weights | |
| Pump Diameter | 8.1 in |
| Overall Height | 9.5 in |
| Operating Weight | 16.5 lb |
COMMERCIAL PUMP RENTAL NEAR ME:
SIMER 2300-04
The Simer 2300-04 is one of the most durable, heavy-duty constructed utility pumps in the market today. The heavy-duty cast aluminum construction is ideal for contractors traveling from job to job. The versatile design allows the pump to be used in a variety of areas: window wells, basements, rooftops, etc.
List of Services
-
List Item 1List Item 1
Maximum pumping capacity of 1320 gallons per hour
-
List Item 2List Item 2
Flow at 10 feet: 1020 gallons per hour
-
List Item 3List Item 3
8 ft. Power cord
-
List Item 4List Item 4
Garden hose adapter
-
New List Item
Heavy-duty aluminum construction maximizes pump life
-
New List Item
Maximum pumping capacity to 1260 gallons per hour
-
New List Item
Easy to use
-
New List Item
Pumps down to 1/8"
-
New List Item
Portable and versatile
| SIMER 2300-04 | |
|---|---|
| Body Construction | Cast Aluminum |
| Horsepower | 1/4 HP |
| Maximum Capacity | 1320 GPH |
| Flow at 10′ Lift | 1020 GPH |
| Discharge Size | 1 ¼” (male) NPT (includes garden hose adapter) |
| Voltage | 115v AC, 60 Hz |
| Cord Length | 8′ |
| Maximum Water Temperature | 120 °F (50°C) |
COMMERCIAL PUMP RENTAL NEAR ME:
MULTIQUIP ST2040T
2 Inch Discharge, 115V 1Ø, 1.0 HP, 79 GPM, 40 ft Total Head. This lightweight, compact submersible trash pump is ideal for moving water with debris (Maximum size - 1” solids). The Industrial grade cast iron housing and abrasion resistant Cast Iron Impeller with Neoprene Rubber overlay tackles tough dewatering applications and heavy usage operations. Further, the ST2040T incorporates a carrying handle, internal thermal overload protection, dual shaft seals, sealed ball bearings impeller, easy impeller clean-out, and molded 25’ Power Cable with strain relief.
List of Services
-
List Item 1List Item 1
1.0HP, 115V/6.5A, 1Ø, UL & CUL Listed Electric Motor
-
List Item 2List Item 2
Built-in Overload Protection
-
List Item 3List Item 3
2” (NPT) Female Discharge
-
List Item 4List Item 4
Total Head: 40 ft
-
New List Item
MAX Capacity: 79 gpm
-
New List Item
Pumps Liquid Up To 120° F
-
New List Item
Heavy-duty Cast Iron Housing construction
-
New List Item
Dewaters Flat Surfaces Up To 2” Levels
| MULTIQUIP ST2040T | |
|---|---|
| Impeller Type | Neoprene Rubber over Cast-Iron |
| Impeller Disc Size | 2 in |
| Total Head | 40 ft |
| Water Capacity | 79 gpm |
| Max. Solid Intake | 1 in |
| Electrical Specifications | |
| Power | 1 HP |
| Phase | Single |
| Voltage | 115 V |
| Starting Amperage | 25 A |
| Running Amperage | 6.8 A |
| Cable Length | 25 ft |
| Dimensions & Weights | |
| Pump Diameter | 10.3 in |
| Overall Height | 16.8 in |
| Operating Weight | 34 lb |
COMMERCIAL PUMP RENTAL NEAR ME:
TSURUMI NK2-15
The NK2-15 is a general dewatering pump. The nk-series is a ktv-based single-phase dewatering pump. The side-flow, top-discharge design assures efficient motor cooling even when it operates with it's motor exposing in air. Semi-vortex pump design is adopted for maximum durability and maintaining pump’s performance. The pump has a built-in starting capacitor.
List of Services
-
List Item 1List Item 1
Terminal board for voltage reconnect allows for change from 110V to 220V
-
List Item 2List Item 2
Semi Vortex Impeller and Synthetic Rubber Wear Plates for maximum durability and maintaining pump performance
-
List Item 3List Item 3
Dual Inside Mechanical Seal With SiC faces provides longer operational life
-
List Item 4List Item 4
Oil Lifter provides lubrication of the seal faces
-
New List Item
V-Ring Seal design protects mechanical seal from abrasive particles
-
New List Item
Sand Kit to suspend solids and prevent clogging
| TSURUMI NK2-15 | |
|---|---|
| Motor Output | 2 HP |
| Phase | Single |
| Discharge Bore | 3 in. |
| Voltage/Amp | 110/23.0 |
| Cable Length | 32 ft. |
| Dimension | 9-7/16 in. x 24-1/2 in. |
| Continuous Running Water Level | 3-1/4 |
| Pump Weight | 80 lb |